12-110V 850W Completed Solar Wind Hybrid System in Los Angeles

The Eco-Sources 850W completed solar & wind power hybrid system composed of 1pc 400W wind turbine with the hybrid controller, 3pcs 150W poly solar panels, 1pc 12V-110V 1000W Off Grid pure sine wave inverter, 2 pairs Y branch MC4 connectors, 1pc 24cm cable with MC4 connectors (Please cut it into two pieces for connection).
Features
1. This system can be placed on a houseboat with the turbine generator. You can use wind and solar simultaneously to charge the battery bank.
2. The controller is 12V/24V autodetect, please connect the battery to the controller firstly, and then connect the solar panel and wind turbine with the controller.
3. Controller connection: Red wire is positive for all connections; Black wire connect with battery negative; Green wires connect with the wind turbine (in no particular order); Blue wire connects with the solar negative; Yellow wire connect with 12V/24V DC devices.
4. The cable connector included is for connecting the solar panels with the controller, you need to get other cables (14awg suggested) to connect the turbine with the controller.
5. High-performance nylon fiber blades by precision molding injection. It’s designed for both land and marine.

Specification
150W Poly Solar Panel

Rated power:150W
Open circut voltage (Voc):22.4V
Max. Voltage (Vmp):18V
Short circuit current (Isc):9.20A
Max.current (Imp):8.33A
Cell Efficiency(nc):17%
Cell Size:6*6inches/156*156mm
Number. type and arrangement of cells:36pcs Poly-Crystalline Silicon(4*9)
Module Efficiency(nm):15.1%
Max-System Voltage(VDC):1000v
Output Power Tolerance:±3%
Temperate coefficient of Isc:+0.05%/ ℃
Temperate coefficient of power Voc:-0.38%/℃
Operating Temperature range:-40℃~+90℃
SLA Battery Voltage:12V
Size:59.1″*26.4″*1.6″ (1500*670*40mm)
Weight:26.5lbs/12kg
Cable Length:35.4inches/900mm

400W Wind Turbine

Nominal Voltage:12-24V
Cut-in Wind Speed:2.5m/s
Rated wind speed:10.5m/s
Maximum wind speed:35m/s
Rated Rotate Speed:800r/min
Battery capacity:200AH-400AH
Fan blade quantity:3pcs
Wind leaf material:Carbon fibre composite
Rotor diameter:1.2M
Tower diameter:Suggest more than 48mm
Altitude of towe:4.5M-10M
control system:Automatic fan dedicated controller
Generator style:Permanent-magento-phase A.C
Net weight:17.64lbs (8kg)
Packing: 27.1″*14.4″*8.3″ (687*365*210mm)

1000W Pure Sine Wave Inverter

Output Volt:110VAC
Continuous Power:1000W
Surge Power: 2000W
Frequency:60Hz
Efficiency:>90%
USB Output:5V
Input Range:10-15VDC
Working Input:12VDC
Fuse:35A
Low Battery A